I shoot and I trained as a DIT, and most of the VFX pain I've seen started on set. Here's my checklist. VFX supervisors, please add to it. Green or blue screen - Light the screen separately from the actor, with soft sources, and check evenness on a waveform. An uneven screen gives an uneven key. - Pull the actor well forward. Distance keeps their shadow off the screen and lets green spill fall off before it reaches hair and shoulders. - Rosco suggests a green gel such as CalColor 4460 on the screen lights, and a light magenta such as CalColor 4730 on backlights if green bounce shows on the actor. - Green suits most digital cameras: a Bayer sensor has twice as many green photosites as red or blue. Go blue when costumes or props are green. - Keep the screen matte and free of creases. Shine reads as a hot spot. Tracking markers - Only where the camera moves and the background has no detail to track. Small markers a little brighter or darker than the screen, in the same hue, key out easily. Spread them at different depths so the solve gets parallax. Reference and data, every setup - Clean plate: same lens, height and move, with the actors gone. - Chrome ball, grey ball and a colour chart at the actors' position, plus an HDRI if the vendor wants one. - Lens grids or distortion charts per lens and per sensor mode, shot during camera prep. Netflix recommends this whenever 3D tracking is expected. - Camera report: lens, focal length, T-stop, focus distance, camera height and tilt, frame rate, shutter angle, sensor mode. Motion blur - Keep the shutter consistent and logged. CG can add blur to match a plate; taking baked blur out of a plate is close to impossible. Delivery - Plates go out as EXR, ungraded, with handles on head and tail and any look as a sidecar file. Netflix's pull system delivers ACES AP0 16-bit float EXRs. Agree handle length and plate naming with the vendor before the first pull. Sources: - Netflix Partner Help Center, VFX Best Practices, https://partnerhelp.netflixstudios.com/hc/en-us/articles/360000611467-VFX-Best-Practices - Netflix Partner Help Center, VFX Plate Naming Best Practices, https://partnerhelp.netflixstudios.com/hc/en-us/articles/360055781274-VFX-Plate-Naming-Best-Practices - Rosco, Going green screen, https://spectrum.rosco.com/index.php/2013/03/going-green-screen
From editorial: name plates the way the vendor expects from day one. Netflix's naming guide uses tags like LG for a lens grid and CH for a chrome ball, next to FG and BG. Slate the reference passes properly too. An unslated chrome ball pass tacked onto the end of a take is as good as lost once it's in the bins.
Director's footnote: give the VFX supervisor time on the schedule and in the shot list. On my second feature the clean plate and ball pass took a couple of minutes per setup, and because the 1st AD had written them into every VFX setup, nobody had to beg for them at the end of a long day.
Producer note: get the vendor's spec sheet before you lock the camera package and the post house deal. Our vendor bid on EXR pulls with their own handle length, and the post house had quoted something else. Fixing it in the contract took one email. Fixing it after the pulls would have meant paying for them twice.