Low budget feature, one prep day at the rental house, and my 1st AC is good but new to primes from this vendor. What does a proper lens check look like? I'd like a list I can hand over so we don't find a soft lens in week two.
Here is mine, largely from David Elkins' 'The Camera Assistant's Manual'. - Put every lens on the house projector or collimator. Look for even sharpness across the frame and centring. - Have the tech check the camera body's flange focal depth with a depth gauge. PL is 52 mm, LPL is 44 mm. If the body or a lens is off, shims fix it, and you want that done today. - Check the witness marks: focus on charts at several marked distances and see that eye focus and the engraving agree. - On zooms, zoom in, focus, zoom out. Focus should hold. If it drifts, back focus is off. - Rings smooth, iris clean, front and rear glass free of scratches and haze. - Shoot a quick chart and a face through every lens and compare colour across the set. Source: ARRI, lens mounts, https://arri.com/en/learn-help/arri-camera-technology/lens-mounts-and-lds-2
Add the support to that list. Build the camera exactly as you will shoot it: head, sticks, slider, the heaviest lens, the matte box with filters in. Check the fluid head balances with that weight and that the drag settings are smooth at the slow end. A head that sticks on a slow pan has ruined more of my takes than any soft lens, and nobody notices it until the dailies.
Followed the list. One 32mm was soft on one side on the projector and the house swapped it on the spot, no argument. Would never have spotted it on a seven inch monitor. The zoom also failed the back focus check and the tech shimmed it in twenty minutes. My AC now has the list taped inside the lens case, and the rental house asked if they could copy it.